Loading ...
Loading ...
Loading ...
2
FIRST USE
OR IF THE MACHINE HAS NOT BEEN USED FOR A
LONG PERIOD
Keep the ground coffee in the fridge as this will lock in the avour for longer.
Do not ll your lter holder to the brim; use the measuring spoon (1 spoon for a 30ml espresso,
2 spoons for 2 x 30ml espressos). Clean off any excess coffee from around the lter holder.
If you have not used the appliance for more than 5 days, empty and rinse the water tank.
Always make sure the appliance is switched off before removing the tank to ll it or empty it.
Always ensure the appliance is positioned on a at and stable surface.
IMPORTANT! Do not place heating elements on the appliance.
IMPORTANT! The safety instructions are part of the appliance.
Please read them carefully before using your new appliance.
RINSING THE SYSTEMS BEFORE FIRST USE
To ensure your rst cup of coffee tastes great, we strongly recommend that you rinse the
espresso machine with hot water, as instructed below:
1. Remove the water tank (A) (1) and ll it (2). The water level should not exceed the
“MAX” mark on the tank and should contain at least 300 ml (= equivalent to 2 large
cups). Then place it back on the machine, ensuring that the cover is closed (3).
2. Connect the device to a mains socket (4).
3. Make sure the knob (L) is set to the preheat position (L1) .
4. Press On button (C) (5) on control panel (D). On button light switches on, and espresso
buttons lights ash white (6). The machine is pre-heating.
5. Place a lter (F2) (7) without coffee into the lter holder. Slot the lter holder into place
and turn it to the right until it stops (8).
6. Place two cups under the lter holder.
7. When the temperature reaches pre-set value, espresso buttons white light will keep on.
Press 2 espresso button (9), button ashes white. The machine starts to pour the
water (10). When it is over, espresso buttons white light keep on.
8. Press steam button (11). Espresso buttons white light off, steam button
orange light keep on, the machine is pre-heating.
9. Place the steam nozzle (G1) into a container lled with water (12).
10. Turn the knob (L) from preheat (L1) to steam position (L2) (13), steam button white
light ashes, the machine starts to make steam. Let the water heat for 20 seconds, then
turn the knob back to preheat position (L1) (14).
Loading ...
Loading ...
Loading ...