Loading ...
Loading ...
Loading ...
5
ENGLISH
1. The machine is in standby mode.
2. Pressorfor 3 seconds. Selected espresso button orange light ashes.
3. Release the button and start set coffee volume.
4. Press the button as soon as the desired volume is reached.
5. Both espresso buttons orange lights ash 3 times to conrm the new setting.
6. The machine goes back to the standby mode.
Note : Programmable quantity for espresso 1 cup (15-65 ml, default volume 30 ml), 2 cups
(30-130 ml, default volume 60 ml).
1. The machine is in steam pre-heat status.
2. Press for 3 seconds. 2 espresso buttons orange light ash one time.
3. Water pump work one time.
4. Default coffee volume is now recovered.
5. The machine goes back to steam pre-heat status.
SETTING THE COFFEE VOLUME
RECOVER DEFAULT COFFEE VOLUME
4. Espresso buttons white lights keep on, steam button white light off.
GOOD TO KNOW – PRACTICE AFTER USING STEAM
• If you want to make an espresso after using the steam function, you need to cool down
your coffee machine to avoid burnt coffee.
• Press steam button , if espresso buttons orange light ash, it means the
temperature in boiler is too high, please do not make coffee right now. You need to
lower temperature.
• Immerse the steam nozzle in a container lled with 60 ml of water.
• Turn the knob from preheat (L1) back to steam position (L2) (25) to make hot water.
Stop make hot water until temperature goes down to pre-set value, then turn the knob
from steam to preheat position. Espresso buttons white light keep on.
CLEANING AND MAINTENANCE
Unplug (J) before each clean and let the appliance cool down rst.
Machine : Clean the outside of the appliance with a damp sponge when you think it
necessary. Do not use detergent or abrasive products. Do not use solvents or abrasive
detergents to clean the coffee machine.
Water tank : Rinse the inside of the tank regularly. When a ne white layer appears in the
tank, descale the appliance (refer to the section on descaling).
Drip tray : Clean the drip tray (I) and its grid (H) using water and a little mild detergent
(30-31). Rinse and dry.
Filter holder, lters : Using a damp cloth, clean the lter holder mount regularly in order
to remove possible coffee residues stuck to the surface. In order to prolong the useful
life of the watertight seal on the brewing head, do not put the lter holder back in place if
the coffee machine has not been used for extended periods. To remove any deposits that
could block the ow of your 1 or 2 cup lter, you may use the needle.
Loading ...
Loading ...
Loading ...