Loading ...
Loading ...
Loading ...
ww_.GEAppliances.com
Possible Causes What To Do
You have a function • Press tile CLEA_OFFpad. Put tile oven back into
error code. operation.
If the function code repeats. • Disconnect all power to tile range for at least 30
seconds and then reconnect power. If the function
error code repeats, call for service.
• On self_cleaning models, if a ffmcdon error code
appears during tile self_cleaning cycle, check the oven
door larch. The latch may have been moved, if only
slightly, from the locked position. Make sure the larch
is moved to the right as far as it will go. Press the
CLEAR/OFFpad. Mlow the oven to cool for one hour.
Put the oven back into operation.
A fuse in your home may be • Replace the fuse or reset the circuit breaken
blown or the circuit
breaker tripped.
The dock is turned off from • See the Using tho clock and timor section.
showing in the display.
Power failure. • Reset the clock.
Oven control pads were • The BAKE and BROIL HIiLO pads must be
pressed
not pressed properly, at the same time and held for 3 seconds.
ii i
Power outage or surge. • Reset the clock. If the oven was in use, you must reset
it by pressing the CLEAR/OFFpad, setting the clock
and resetting any cooking ihnction.
This is normal in a new • To speed dm process, set a self-clean cycle for a
oven and will disappear minimum of 3 hours. See the Using the self-
in time. cleaning oven section.
Strong,dot An odor from the insulation • This is tempora W.
around the inside of the
oven is normal for the first
few times the oven is used.
29
Loading ...
Loading ...
Loading ...