Loading ...
Loading ...
Loading ...
DJI Air 3
User Manual
64
©
2023 DJI All Rights Reserved.
Charging Intelligent Flight Battery
1. Insert the batteries into the charging hub until there is a click.
2. Connect the charging hub to a power outlet using a charger. It is recommended to use the
DJI 100W USB-C Power Adapter. The Intelligent Flight Battery with the highest power level
will be charged rst, and then the rest will be charged in sequence according to their power
levels. The status LED indicates the battery level during charging. Refer to the Status LED
Descriptions for more information about the blinking patterns of the status LED.
3. The battery can be stored in the charging hub after charging. Press and hold the battery
release button to remove the corresponding battery from the charging hub.
• The charging hub is only compatible with BWX233-4241-14.76 Intelligent Flight Battery.
DO NOT use the charging hub with other battery models.
• Place the charging hub on a at and stable surface with good ventilation when charging
an external device or accumulating power. Make sure the device is properly insulated
to prevent re hazards.
• DO NOT touch the metal terminals on the battery ports. Clean the metal terminals with
a clean and dry cloth if there is any noticeable buildup.
• Make sure to charge batteries with low battery power in time. It is recommended to
store the batteries in the charging hub. The charging hub automatically checks the
battery power every seven days. When a battery has 0% power level, the battery with
a high power level will charge the low power level battery until its power reaches 5% to
prevent over-discharging.
The DJI Air 3 Battery Charging Hub is designed to charge up to three Intelligent Flight Batteries.
After the Intelligent Flight Batteries are installed, the charging hub can supply power to external
devices via the USB-C port, such as remote controllers or mobile phones. The charging hub
can also use the power accumulation function to transfer the remaining power of multiple low-
power batteries into the battery with the highest remaining power.
1. USB-C Connector
2. Status LED
3. Function Button
4. Battery Release Button
5. Battery Port
4
5
3
2
1
Loading ...
Loading ...
Loading ...