Loading ...
Loading ...
Loading ...
DJI Air 3
User Manual
28
©
2023 DJI All Rights Reserved.
Takeo/Landing Procedures
1. Place the aircraft in an open, at area with the rear of the aircraft facing towards you.
2. Power on the remote controller and the aircraft.
3. Launch DJI Fly and enter the camera view.
4. Tap Settings > Safety, and then set the Obstacle Avoidance Action to Bypass or Brake. Make
sure to set an appropriate Max Altitude and RTH Altitude.
5. Wait for the aircraft self-diagnostics to complete. If DJI Fly does not show any irregular
warning, you can start the motors.
6. Push the throttle stick up slowly to take o.
7. To land, hover over a level surface and gently push the throttle stick down to descend.
8. The motors will stop automatically after landing.
9. Power o the aircraft before the remote controller.
Video Suggestions and Tips
1. The pre-ight checklist is designed to help you y safely and shoot videos during ight. Go
through the full pre-ight checklist before each ight.
2. Select the desired gimbal operation mode in DJI Fly.
3. It is recommended to take photos or record videos when ying in Normal or Cine mode.
4. DO NOT y in bad weather such as on rainy or windy days.
5. Choose the camera settings that best suit your needs.
6. Perform ight tests to establish ight routes and preview scenes.
7. Push the control sticks gently to ensure smooth and stable movement of the aircraft.
• Make sure to place the aircraft on a flat and steady surface before takeoff. DO NOT
launch the aircraft from your palm or while holding it with your hand.
Loading ...
Loading ...
Loading ...