Loading ...
Loading ...
Loading ...
DJI Air 3
User Manual
©
2023 DJI All Rights Reserved.
39
orientation and the gimbal angle.
2. Set the interval time, video duration, and max speed. The screen displays the number of
photos that will be taken and the shooting duration.
3. Tap the shutter/record button to begin.
The aircraft will generate a timelapse video automatically, which is viewable in playback.
• For optimal performance, use Hyperlapse at an altitude higher than 50 m and set a
dierence of at least two seconds between the interval time and shutter.
• It is recommended to select a static subject (e.g., high-rise buildings, mountainous
terrain) located at a safe distance from the aircraft (further than 15 m). Do not select a
subject that is too close to the aircraft, people, or a moving car, etc.
• When the lighting is sucient and the environment is suitable for the vision systems
to operate, the aircraft will brake and hover in place if an obstacle is detected during
Hyperlapse. If the lighting becomes insucient or the environment is unsuitable for the
vision systems to operate during Hyperlapse, the aircraft will continue shooting without
obstacle sensing. Fly with caution.
• The aircraft will only generate a video after at least 25 photos have been taken, which
is the amount required to generate a one-second video. The video will be generated by
default regardless of whether Hyperlapse concludes normally or the aircraft exits from
the mode unexpectedly (such as when Low Battery RTH is triggered).
Waypoint Flight
Waypoint Flight enables the aircraft to capture images during a ight according to the waypoint
flight route generated by the preset waypoints. Points of Interest (POI) can be linked to the
waypoints. The heading will point toward the POI during ight. A waypoint ight route can be
saved and repeated.
Using Waypoint Flight
1. Enable Waypoint Flight
Tap
on the left of the camera view in DJI Fly to enable Waypoint Flight.
Loading ...
Loading ...
Loading ...