Loading ...
Loading ...
Loading ...
English
4219-450-08061 MANUAL GAG. CAD. PRESTIGE EN-FR 120US.indd 37
Descaling
Descaling procedure
Descaling needs to be carried out when the machine signals it.
Use only the Gaggia descaling solution designed to guarantee the machine’s excellent
performance. The use of other products could damage the machine and leave residue in
the water. Failure to descale the machine will void the warranty.
1 Press the CLEAN/SETTING button and select the " CLEAN " button shown on
the display.
- Press the " DESCALING " button, then press the START/STOP button.
2 Remove the drip tray and the coffee pucks container, empty them, and insert them
in the machine again.
3 Remove the water tank and empty it. Remove the INTENZA+ filter, if present.
4 Empty the entire bottle of Gaggia descaling solution into the water tank and fill the
tank with water up to the CALC CLEAN notch. Reinsert it in the machine.
5 Fill the milk carafe halfway with water and insert it in the machine.
6 Follow the instructions shown on the display to launch the descaling procedure. This
procedure lasts approximately 25 minutes and consists of a descaling cycle and a
rinse cycle, carried out with dispensing at regular intervals.
7 Once the descaling cycle is complete, rinse the water tank, carafe and water circuit,
following the instructions shown on the display.
8 Replace the INTENZA+ filter into the water tank.
Note: it is possible to pause and resume the procedure at any time by pressing the
START/STOP button.
Warning: when the descaling procedure is active, the brew group cannot be removed.
Wait for the descaling process to end, then remove the brew group.
DEEP MILK CLEAN
QUICK MILK CLEAN
BREW GROUP CLEAN
DESCLING
Loading ...
Loading ...
Loading ...