Loading ...
Loading ...
Loading ...
English
4219-450-08061 MANUAL GAG. CAD. PRESTIGE EN-FR 120US.indd 19
Installing the INTENZA+ water filter
Remove the small white filter from the water tank and store it in a dry place.
Immerse the INTENZA+ water filter vertically (with the opening pointing up) in cold
water and gently press its sides to let any air bubbles out.
Remove the INTENZA+ water filter from the water. Set the machine according to the
detected water hardness (see the "Measuring water hardness" chapter) and the letters
found on the filter base:
A = soft water – 1 or 2 small squares
B = hard water (standard) – 3 small squaresC = very hard water – 4
small squares
Place the INTENZA+ filter in the water tank, ensuring it is correctly in place. Refill the
water tank and place it in its compartment.
Follow the instructions shown on the display to activate the filter.
Note: you can pause the filter activation procedure by pressing the START/STOP
button. To resume the procedure, press the START/STOP button again.
Replacing the INTENZA+ water filter
When the INTENZA+ water filter runs out, the display will show a warning message.
1 Replace or disable by pressing the CLEAN/SETTING button, and then the "
SETTINGS " button.
2 Select the " WATER FILTER " button.
3 Select " REPLACE " to change the filter or " DISABLE " if you do not intend to use the
filter. Confirm with the " " button.
Follow the instructions shown on the display to activate the filter correctly.
Note: If you do not want to replace the filter, select "DISABLE" to disable it.
WATER FILTER
REPLACE
ACTIVATE
DISABLE
Loading ...
Loading ...
Loading ...