Loading ...
Loading ...
Loading ...
User’s Manual
15
Parameter Description
Delay Time
The system provides you with time to leave or enter the
protection zone without alarm.
●
Delay Time for Entering Arming Mode
: When you enter
the zone, if you do not disarm the system before the delay
ends, an alarm will be triggered.
Make sure that the delay time for entering arming mode is
no longer than 45 seconds in order to comply with
EN50131-1.
●
Delay Time for Exiting Arming Mode
: When you are in the
zone and arm the system, if you do not leave the zone
before the delay ends, an alarm will be triggered. You can
select from 0 s to 120 s.
The arming mode will be effective after the delay time.
Sensitivity
●
Adjust sensitivity level of motion detection.
●
Select from low, medium and high.
Siren Linkage
When an alarm is triggered, the peripherals will report the alarm
events to the hub and alert with siren.
Signal Strength Detection Test the current signal strength.
Detector Test
Tap
Start Detection
to test the status of the PIR-Camera.
RF-HD Test
Tap
Start Detection
to test the signal strength for transmitting
images between the PIR-Camera and the hub.
Transmit Power
●
Select from high, low, and automatic.
●
The higher transmission power levels are, the further
transmissions can travel, but power consumption increases.
If you select
Low
, the PIR-Camera will enter into reduced
sensitivity mode.
Cloud Update Update online.
Delete
Delete the PIR-Camera.
Go to the hub screen, select the PIR-Camera from the
peripheral list, and then swipe left to delete it.
Loading ...
Loading ...
Loading ...