Loading ...
Loading ...
Loading ...
ASSEMBLY STEP 3 LookNots
1/4"-20
Attach the Rail Brackets
• Align rail brackets to end of rail assembly, as
shown.
• Insert two 1/4"-20 x 5/8" hex bolts and lock nuts.
Tighten securely with a 7/16" socket.
You have now finished assembling your garage
door opener. Please read the following warnings
before proceeding to the installation section,
Rail
j Brackets
Rex
Bolts Rail
1/4"-20x5/8
HARDWARESHOWNACTUALSIZE
Lock Nut
Hex Bolt 1/4" - 20
I/4" - 20 x 5/8"
©
INSTALLATION
IMPORTANT INSTALLATION INSTRUCTIONS
To reduce the risk of severe injury or death:
1. READAND FOLLOWALL INSTALLATIONWARNINGS
AND INSTRUCTIONS.
2. Install garage door opener only on properly balanced
and lubricated garagedoor. An improperlybalanced
door may not reversewhen required and could result in
SEVEREINJURY or DEATH.
3. All repairs to cables, spring assembliesand other
hardware MUST be made by a trained door systems
technician BEFOREinstalling opener.
4. Disableall locks and remove all ropes connected to
garagedoor BEFOREinstallingopenerto avoid
entanglement.
5. Install garage door opener 7 feet or more above floor.
6. Mount emergency releasehandle 6 feet abovefloor.
7. NEVERconnect garage door opener to power source
until instructedto do so.
8. NEVERwear watches, rings or loose clothing while
installing or servicing opener.They could be caught in
garagedoor or opener mechanisms.
9. Install wall-mounted garagedoor control:
• within sight of the garage door
• out of reach of children at minimum height of 5 feet
• awayfrom all moving parts of the door.
10. Placeentrapment warning labelon wall next to garage
door control.
11. Place manual release/safety reverse test label in plain
view on inside of garagedoor.
12. Upon completion of installation,test safety reversal
system. Door MUST reverseon contact with a one-
inchhigh object (ora 2x4 laidflat) on the floor.
11
Loading ...
Loading ...
Loading ...