Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/63754183-oip-d50d/bg8.png)
7
NO
Item
Function Descriptions
channel will not be able to enable their USB connection.
⑨
IR Receive
Window
It can receive IR signals from any standard remote control and send the
received IR signals to the IR output port on the encoder.
⑩
IR Input Port
After connecting to IR extender, aim at the remote control to extend the
IR control range of the remote control to the far ends.
⑪
IR Output Port
After connecting to IR emitter, aim at the controlled device to send the
received IR signals from the remote control to the controlled device.
⑫
ISP SEL On/Off
For manufacturers only. The default position of this switch is OFF, which
can perform normal RS-232 transmission function. If the switch is on, the
ISP engineering mode will be activated.
⑬
RS-232 Port
Connect to the RS-232 controlled device to execute RS-232 commands
of the computer. The default baud rate is 115200 bps, which can be set
by users.
<Remark> With Multicast, the encoder can send RS-232 commands to
all decoders, and individual decoders can send RS-232 commands to
the encoder.
2.4.4 OIP-D50D Decoder - Rear Panel
NO
Item
Function Descriptions
①
Microphone
Input Port
Connect to a microphone to input analog audio, which is played by the
LINE output port on the encoder (limited to unicast mode).
<Remark> The LINE input port on the encoder must be connected to a
signal source to enable the microphone on the decoder.
②
LINE Output
Port
Connect to a power-supplied speaker or AV amplifier to output analog
audio, which can play HDMI or Line-level signal source from the
encoder, and support LPCM 2.0 sound effect.
③
Optical output
port
Connect to a power-supplied speaker or AV amplifier to output digital
audio, which can play HDMI or Line-level signal source from the
encoder, and support LPCM 2.0 & Bitstream sound effect.
④
HDMI output
port
Connect to HDMI display or audio-visual amplifier to output digital
images and audio.
⑤
VGA output port
Connect to a VGA display to output analog images (limited to VGA or
non-HDCP encrypted HDMI signal source).
<Remark> When sending 4K@60 Hz (YUV 4:2:0) images from a
computer, image signals may have artifacts.
⑥
ISP Button
For manufacturers only.
⑦
OIP LAN Port
Connect to a network switch to serially connect a compatible encoder to
transmit data, or connect to a computer to use WebGUI to operate the
device.
<Remark> If the network switch adopts PoE (IEEE 802.3af) technology,
power can be obtained directly from the network switch. For PoE power
supply, please connect to OIP1. For serial connection, please use any
port.
⑧
Power Port
Plug in the 5V DC power supply and connect to an AC outlet (or choose
to supply power via PoE).
Loading ...
Loading ...
Loading ...