Loading ...
Loading ...
Loading ...
13
5.1.3 System - Utility Program
No
Item
Description
1
Commands
To restore the factory default settings of the device, please press [Factory Default]. If
you only need to restart the device (settings will not be reset), please press [Reboot].
2
Reset EDID to
Default Value
If the EDID data from the decoder is not compatible with the HDMI/VGA signal source,
please select the built-in HDMI EDID setting of the encoder (support 4K30 resolution,
including audio) or VGA EDID (support WUXGA resolution, excluding audio) setting to
solve the compatibility problem. Then, press [Apply].
<Remark> If restart the device, the EDID setting will be reset.
* The decoder operation interface does not have this function.
3
Console API
Command
To send a Telnet command to the device, enter the Telnet command in the Command
field, and then press [Apply]. The device’s response to the command will be showed on
the Output field.
<Remark> To check Telnet commands, please refer to OIP-D50E. D50D Telnet
Command List.
1
2
3
Dencoder
Loading ...
Loading ...
Loading ...