Loading ...
Loading ...
Loading ...
5
NO
Item
Function Descriptions
dithering processing make low-broadband signals difficult to save, when
processing live image compression. This function will remove the
dithering processing and then compress and transmit signals. If the
signal source has not been dithered, do not enable this function.
<Remark> Anti-dither is off by default (Off mode).
⑩
ISP Button
For manufacturers only.
⑪
Reset Button
Press this button to restart the device (all settings will be retained).
⑫
VGA Loopback
Output Port
Connect to a VGA display to output analog images, which can be used to
locally monitor the current VGA or HDMI signal sources (non-HDCP
encryption, and the resolution is 1080p or below).
2.4.2 OIP-D50E Encoder - Rear Panel
NO
Item
Function Descriptions
①
Power Port
Plug in the 5V DC power supply and connect to an AC outlet (or choose
to supply power via PoE).
②
USB Port
Connect to a computer and expand its USB function to the USB port of a
compatible decoder.
③
OIP LAN Port
Connect to a network switch to serially connect a compatible decoder to
transmit data, or connect to a computer to use WebGUI to operate the
device.
<Remark> If the network switch adopts PoE (IEEE 802.3af) technology,
power can be obtained directly from the network switch.
④
VGA input port
Connect to a VGA source device, such as a desktop computer or laptop.
<Remark> When sending 4K@60 Hz (YUV 4:2:0) images from a
computer, image signals may have artifacts.
⑤
HDMI Input Port
Connect to HDMI source devices, such as digital media players, video
game consoles or set-top boxes, and HD cameras.
⑥
LINE Input Port
Connect to a CD player or computer to input analog audio.
<Remark> When this input port has a signal source, this device will
embed the audio into signals to be transmitted, and the original HDMI
audio will be replaced completely.
⑦
LINE Output
Port
Connect to a power-supplied speaker or AV amplifier to output analog
audio, which can only play the microphone signal sources from the
decoder (limited to unicast mode).
<Remark> The LINE input port on the encoder must be connected to a
signal source to enable the microphone on the decoder.
Loading ...
Loading ...
Loading ...