Loading ...
Loading ...
Loading ...
12
Multiple Rack Cooking
Two-rack (non-convection): Use rack positions 2 and 5 or 3 and 6.
Two-rack (convection): Use rack positions 2 and 5 or 3 and 6.
Three-rack (convection): Use rack positions 2 and 7 and a Max
Capacity Oven Rack in rack position 5.
Baking Layer Cakes on Two Racks
For best results when baking cakes on two racks, use the Bake
function, a flat rack in rack position 5, and a flat rack in rack
position 2. If you do not have two flat racks, use a Max Capacity
Oven Rack in rack position 6. Place the cakes on the racks as
shown. Keep at least 3" (7.6 cm) of space between the front of
the racks and the front cakes.
Baking Cookies
For best results when baking cookies on two racks, use
the Convection Bake function, a flat rack in rack position 6,
and a flat rack in rack position 3.
If you do not have two flat racks, use a flat rack in rack
position 2 and a Max Capacity Oven Rack in rack position 6.
If you do not have Convection Bake, use the standard
Bake function.
Oven Vent
The oven vent releases hot air and moisture from the oven, and
should not be blocked or covered. Blocking or covering the vent
will cause poor air circulation, affecting cooking and cleaning
results. Do not set plastics, paper, or other items that could melt
or burn near the oven vent.
Baking and Roasting
Temperature Management System
The temperature management system electronically regulates the
oven heat levels during preheat and bake to maintain a precise
temperature range for optimal cooking results. The bake and
broil elements cycle on and off in intervals. On convection range
models, the fan will run while preheating and may be cycled on
and off for short intervals during Bake to provide the best results.
This feature is automatically activated when the oven is in use.
Before baking and roasting, position racks according to the
“Positioning Racks and Bakeware” section. When roasting, it is
not necessary to wait for the oven preheat cycle to end before
putting food in unless it is recommended in the recipe.
Preheating
When beginning a Bake, Convect Bake, or Convect Roast cycle,
the oven will begin preheating after Start is pressed. The oven
will take approximately 12 to 15 minutes to reach 350°F (177°C)
with all of the oven racks provided with your oven inside the
oven cavity. Higher temperatures will take longer to preheat. The
preheat cycle rapidly increases the oven temperature. The actual
oven temperature will go above your set temperature to offset
the heat lost when your oven door is opened to insert food. This
ensures that when you place your food in the oven, the oven
will begin at the proper temperature. Insert your food when the
preheat tone sounds. Do not open the door during preheat before
the tone sounds.
Rapid Preheat
Rapid Preheat can be used to shorten the preheating time. Only
one standard flat oven rack should be in the oven during Rapid
Preheat. Extra racks should be removed prior to starting Rapid
Preheat. Press RAPID PREHEAT and follow the oven control
prompts, or, if preheating has already started, simply press
RAPID PREHEAT. The preheating cycle should be completed
before placing food in the oven. When the rapid preheat cycle is
complete, the oven starts a normal Bake cycle.
IMPORTANT: Rapid Preheat should be used only for one-rack
baking.
Oven Temperature
While in use, the oven elements will cycle on and off as needed
to maintain a consistent temperature, but they may run slightly
hot or cool at any point in time due to this cycling. Opening the
oven door while in use will release the hot air and cool the oven
which could impact the cooking time and performance. It is
recommended to use the oven light to monitor cooking progress.
NOTE: On models with convection, the convection fan may run in
the non-convection Bake mode to improve oven performance.
Frozen Bake™
Frozen Bake™ Technology automatically adjusts the
manufacturer’s bake time by combining preheating and baking,
to deliver great packaged frozen food results without the wait.
There are six programmed food options to choose from: Pizza,
Lasagna, Nuggets, Fries, Pie, and Meal. The Frozen Bake™ cycles
have been customized to work only with these foods. When
using Frozen Bake™ Technology, it is important that you follow all
manufacturer’s instructions including venting, covering, stirring or
placing on a baking sheet to ensure a good result. When cooking
frozen meals, only cook items that provide instructions for cooking
in a conventional oven. Place your dish in the center of the rack
and select one of the rack positions recommended for Frozen
Bake™ in the “Positioning Racks and Bakeware” section and
bake only one package or pan at a time. Use the temperature and
maximum bake time from the package.
A tone will alert you to check the food for doneness before the
cook time is complete and again at the end of the cook time. The
display will prompt you to add additional cook time if desired.
A
A. Oven vent
Loading ...
Loading ...
Loading ...