Loading ...
Loading ...
Loading ...
- 3 -
Revision 06/2022
Copyright © 2022, Fast ČR, a.s.
• Fill the water tank with clean cold water. Do not pour hot water or other liquids into it or place any items inside it.
• Before turning on the appliance, check that:
– the drip tray together with the grate is installed in position;
– the water tank is filled with a sufficient amount of water and is properly installed in position. The water level must not exceed the water level mark.
• When operating the appliance, be especially careful to avoid scalding by boiling water or steam.
• The hot water function must not be used continuously, no more than one full water tank at a time.
• Regularly inspect the water level in the water tank when using the appliance. When the water level falls below the minimum water level mark, add
water. Before adding water, first turn the appliance off and disconnect it from the power socket.
• Use the built-in coffee grinder only for grinding coffee beans. Do not use it for any other purposes.
• Ensure that no hair or other items enter the grinder while it is grinding. The coffee bean hopper lid should always be properly closed unless one is
refilling coffee beans or setting the fineness of the grind.
• To protect the pump from damage, the appliance is equipped with a built-in thermal fuse that will disengage it when it runs empty. In the event that
such a situation occurs, disconnect the power cord from the power socket and allow the appliance to cool down for at least 30 minutes. Then you
may continue using it.
• Do not move the appliance with a coffee cup located on the drip tray grate or with cups located on the cup warming surface.
• Ensure that the power cord does not come into contact with water or a hot surface.
• Disconnect the appliance from the power socket by pulling on the plug, never pulling on the power cord. Otherwise, this could damage the power
cord or the socket.
• The appliance is equipped with a removable power cord. If the power cord is damaged, it must replaced with a new original power cord.
• Do not submerge the appliance, the power cord or the power plug in water or in any other liquid.
• Prevent the power cord and power plug from coming into contact with water or another liquid.
• Make sure that the removable power cord does not come into contact with water or moisture.
• To avoid the danger of injury by electrical shock, do not repair the appliance yourself or make any adjustments to it. Have all repairs or adjustments
performed at an authorised service centre. By tampering with the appliance, you risk voiding your legal rights arising from unsatisfactory
performance or quality warranty.
Loading ...
Loading ...
Loading ...