Loading ...
Loading ...
Loading ...
- 5 -
Revision 06/2022
Copyright © 2022, Fast ČR, a.s.
2. Turning the regulator towards the position marked with the plus
symbol sets acoarser grind, and turning it in the opposite direction
sets afiner grind.
3. The fineness of the grind is set only while the grinder is running.
Otherwise, you could damage your appliance. For darker coffee
beans, we recommend setting acoarser grind, for lighter coloured
coffee beans, we recommend afiner grind.
4. If the brewed coffee is flowing out very slowly, it means that
the coffee grains are too finely ground and it is necessary to set
acoarser grind. On the other hand, if the brewed coffee is flowing out
too fast, it means that the coffee grains are too coarsely ground and
it is necessary to set afiner grind.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RECOMMENDATIONS FOR PURCHASING AND STORING COFFEE
• To reduce the storage time, purchase coffee beans in smaller
packages.
• Use fresh roasted coffee beans with amarked roasting date and
consume them within 3 weeks of the roasting date.
• Store coffee beans in acool, dark and dry location, ideally in an
air-tight container.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPERATING THE ESPRESSO MACHINE
• Make sure that the power cord connector A9 is connected to the
appliance. Connect the power cord plug A9 to apower socket. Make
sure that the water tank A1 is refilled with fresh water and that the
coffee bean hopper A3 is filled with asufficient quantity of coffee
beans and that the appliance is properly assembled.
Note:
When refilling water and coffee beans, always follow the
instructions provided in chapter »Filling the water tank« and
»Filling the coffee bean hopper«.
• To start the appliance, press button
B7. The appliance will switch
to the stand-by mode.
• When you have finished using the espresso machine, press button
B7 to turn it off.
Note:
The automatic espresso machine is equipped with an
automatic shut-off function for when it is idle. Based on the
selected mode, the automatic espresso machine will shut off
after the preset time has elapsed. The automatic shut-off time
can be found in section«Setting the mode«.
Rinsing out the espresso machine
• To ensure the optimal lifetime of the appliance, it is necessary to allow
its internal components to be rinsed out several times with hot water
prior to first use.
1. Take out the outer drip tray A8 and place amug or bowl underneath
the brewing head A5, into which the espresso machine will dispense
water. Adjust the height of the brewing head A5 based on the size of
the cup.
2. Press button
B10. The button'sbacklight will be lit and the
espresso machine will start dispensing hot water.
3. The dispensing of hot water will stop automatically and the
button'sbacklight will turn off.
4. To thoroughly rinse out the internal components, we recommend
that the process is repeated 3 to 4 times.
5. When the rinsing process is finished, pour the water out of the mug
or bowl. Be especially careful since the water is very hot. Install the
outer drip tray A8 back in place. Refill the water in the water tank A1
as necessary.
Note:
Perform the rinsing process also when you have not used the
espresso machine for an extended period of time. The pump
will make anoise during the water dispensing process. This
is normal.
Brewing coffee
1. Place acup, mug or glass underneath the brewing head A5. Set the
height of the brewing head A5 by sliding it up or down depending on
the size of your cup, mug or glass – see figure E. If the cup or glass
is too tall, you may remove the outer drip tray A8. After removing the
cup or glass, return the drip tray A8 to its place.
2. Press button
B11 to brew espresso coffee or button B12 to
brew lungo coffee. Press button to confirm.
3. The espresso machine will automatically start the coffee grinding,
dosing and tamping process, and will dispense it.
4. As soon as the espresso machine has finished dispensing the coffee,
it will automatically switch to the stand-by mode.
Dispensing hot water
1. Pod hlavici A5 postavte šálek, hrnek nebo sklenici. Nastavte výšku
hlavice A5 posunutím směrem nahoru nebo dolů dle velikosti
vašeho šálku, hrnku nebo sklenice – viz obrázek E. Pokud je hrnek
nebo sklenice příliš vysoká, můžete vnější odkapávací tácek A8
odejmout. Po odejmutí hrnku nebo sklenice vraťte tácek A8 zpět na
své místo.
2. Stiskněte tlačítko
B10 atlačítko se podsvítí.
3. Kávovar automaticky spustí výdej horké vody.
4. Jakmile je proces výdeje vody dokončen, kávovar se automaticky
přepne do pohotovostního režimu.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USER SETTINGS
Setting the amount of ground coffee
• Use the ground coffee amount adjustment when the brewed coffee is
too strong or too weak.
• Button
B8 serves to adjust the amount of ground coffee.
• Based on personal preferences, select the amount of ground coffee by
repeatedly pressing button
B8: small (approx. 7 g), medium
(approx. 8 g) or large
(approx. 10 g).
Setting the dispensed coffee / hot water volume
• The espresso machine enables the amount of dispensed coffee or
hot water to be adjusted based on your preferences in the range
25ml–250ml. The settings you make will be saved to the memory
of the espresso machine.
1. Place acup, mug or glass underneath the brewing head A5.
2. Turn on the espresso machine by pressing button
B7 .
3. Hold down button
B11 (to brew espresso coffee), B12 (to
brew lungo coffee) or
B10 (to dispense hot water). The espresso
machine will start dispensing coffee or water.
4. When the button is released, the dispensing of coffee or water will
stop. Abeep is made and the set amount of coffee or water will be
saved to the memory of the espresso machine.
Setting the mode
• The espresso machine can be set to an ECO mode, afast mode or
the default factory settings. In ECO mode, greater power savings are
achieved. In the fast mode, the coffee is prepared faster than with the
default factory settings.
ECO mode Fast mode
Default
settings
Indicator light Not lit Lit Lit
Pre-steam * Yes No Yes
Automatic shut-off
time
10 minutes 30 minutes 20 minutes
Option to set the
dispensed coffee
volume
Yes Yes Yes
*Note:
The pre-steam function means that the ground coffee is first steamed with
asmall amount of water. This will cause the coffee to swell and thereby
Loading ...
Loading ...
Loading ...