Loading ...
Loading ...
Loading ...
3. Connect the charger with the computer USB port. While charging, the LED will
light up; when fully charged, the LED will light off; when the battery take off, the
LED will flash.
4. Reconnect the battery to the Easypilot.
CAUTIONS WHEN CHARGING
1. When charging, please put this product on a dried or ventilated area and keep it far
away form heat source or explosive product.
2. When charging, please remove the batteries from the Easypilot. Then charging
process should be supervised by an adult so as not to cause an accident.
3. After flying, please do not charge the battery if the surface temperature is still not
cool. Otherwise it may cause a swollen battery or even a fire hazard.
4. A battery when not in use for a long time will lose its charge automatically.
Charging or discharging too often may reduce the life of the battery.
Flight
Always use caution when flying and operate in an open and controllable area. Please
learn the flight controls first before powering on the aircraft to fly.
Fly Easypilot
Start by powering on your Radio and Goggles. Easypilot comes already bound to
your radio and on the right video channel matched with your goggles. Power on
easypilot by sliding the battery into the battery tray and plugging it in. Once the
battery is plugged in, set easypilot on a stable surface so it can calibrate. Calibration
takes a few seconds then easypilot is ready to fly. Easypilot can fly for 4 minutes on a
fully charged battery. The easypilot will landing when the battery reaches 3.3v.
Arming
Arming refers to setting easypilot to a fly ready state. When easypilot is powered on
first it will not spin up the propellers until it is armed. Arm the aircraft by first moving
throttle to the bottom position. Then move the left switch of the radio to its top
position upwards.
Loading ...
Loading ...
Loading ...