Loading ...
Loading ...
Loading ...
4. Please remove antennas and power lead when traveling/storing the goggles.
Operation
Power
Power on the goggles by plugging in the power lead from the battery cartridge.
Power off by unplugging the power lead from the battery cartridge.
Video Channel Selection
There are 2 buttons (CH and FR) that can manually select the correct channel and
frequency band. The table below shows the channel and frequency band map with
the respective frequency number. This is the recommended way to change channels
to the correct frequency on easypilot. The CH button will cycle through the channel
number (1-8) while the FR button will cycle through the frequency band (A,B,E,F,R,H).
The frequency band and channel number will be shown in the upper left corner of
the screen when cycling through channels.
Tip: Make sure easypilot is powered on. When cycling through channels it will be
easier to spot the correct one with the video feed from easypilot.
Caution: Make sure the goggles are on the correct channel that easypilot is on.
Video Channel Auto Scanning
There is a scanning function on the goggles to aid in finding which channel easypilot
is on. First power on easypilot then press the “A” button to start the auto scan mode.
This mode will cycle through all channels and select the channel with the best video
reception. The frequency band and channel number will be shown in the upper left
corner of the screen when cycling through channels.
Caution: If using this feature with multiple easypilot (or other drones with a vtx)
powered on, autoscan may select the wrong drones channel. We recommend
manually selecting the correct channel to prevent mismatch errors.
Screen Adjustments
The menu button (“M”) will bring up a menu where you can adjust brightness,
contrast, saturation, and language. To cycle through menu options, press the menu
button again. With the current selection highlighted, adjustments can be made
pressing the “FR” button to increment and “CH” to decrement. The menu will close
automatically after 3 seconds if no input was detected.
Charger
Charge battery of Easypilot
1. Pull out the battery from the Easypilot.
2. Take out the battery charger, and insert the battery power port to the charger.
Loading ...
Loading ...
Loading ...