Loading ...
Loading ...
Loading ...
www.manitowocfsusa.com 800-225-9916 16
Ceiling Support
Indoor enclosures with dimensions of more than 15’-5” in both length and width must
have some type of support for the ceiling panels. Exterior steel beams, ceiling hangers,
or interior steel beams with column supports must be used. Reference details provided
on the as built drawing and the diagram below for suspended ceiling support installation
instructions.
WARNING
These systems must be installed properly in order to provide the necessary support for
the ceiling panels, allowing them to maintain their design load rating. Failure to do so
may result in an unsatisfactory installation, or an unsafe condition.
The top panels on walk-in units are designed, at a minimum, for an allowable live load
of ten pounds per square foot as noted on submittal drawings and installation
instructions. Top panels are not designed as work platforms or for dry storage and
should not be used as such. Use in such a manner could damage the structural
integrity of the top panels and will void the manufacturer’s warranty.
Loading ...
Loading ...
Loading ...