Loading ...
Loading ...
Loading ...
Remove packaging material, [area name]
1 Remove any remaining packing material from the indicated location.
2 From the printer control panel, touch Continue to clear the message.
Remove paper from standard output bin
Remove the paper stack from the standard bin.
Replace all originals if restarting job.
Try one or more of the following:
• Tou ch Cancel job to clear the message and cancel the scan job.
• Tou ch Scan from automatic feeder to continue scanning from the ADF immediately after the last
successful scan job.
• Tou ch Scan from flatbed to continue scanning from the scanner immediately after the last successful
scan job.
• Tou ch Finish job without further scanning to end the last successful scan job.
• Tou ch Restart job to restart the scan job with the same settings from the previous scan job.
Replace jammed originals if restarting job.
Try one or more of the following:
• Tou ch Cancel job to clear the message and cancel the scan job.
• Tou ch Scan from automatic feeder to continue scanning from the ADF immediately after the last
successful scan job.
• Tou ch Scan from
flatbed
to continue scanning from the scanner immediately after the last successful
scan job.
• Tou ch Finish job without further scanning to end the last successful scan job.
• Tou ch Restart job to restart the scan job with the same settings from the previous scan job.
Replace maintenance kit [80.xy]
The printer is scheduled for maintenance. For more information, go to http://support.lexmark.com or
contact your service representative, and then report the message.
Replace missing [type] imaging kit [31.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Install the indicated imaging kit to clear the message. For more information, see the “Replacing supplies”
section of the User’s Guide.
Troubleshooting 257
Loading ...
Loading ...
Loading ...