Loading ...
Loading ...
Loading ...
Automotive Diagnostic System NT809 User's Manual V1.0
38
service replacement procedures and calibrate the parking brake systems
after brake service.
● Sensor calibration on Honda EPB vehicles - allows to program the
current output value of each sensor into the electric parking brake unit.
● Provides parking brake unjam procedure and perform longitudinal
accelerometer calibration on Land Rover EPB vehicles - allows to
drive the electronic park brake so it is unjamed in the releasing direction
and then drive it into mounting position or the latching position; also
allows to perform longitudinal accelerometer calibration.
● EPB systems must be deactivated before carrying out any
maintenance/service work on the brakes such as changing of pads, discs
and calipers.
● Use proper tools to avoid the risk of body injuries of mechanics and
technicians and damage to the brake system.
● Make sure the vehicle is properly blocked after deactivation of the
systems.
6.3 Battery Replacement (BRT)
BRT menu lets you to have new battery validated, clear faults from the
dashboard and display current battery details of the vehicle such as Audi,
BMW, Citroen, Peugeot, Seat, Skoda, Volvo, VW and Ford.
1. Replace the old battery with the new one. Ensure the key is not in the
ignition.
2. Connect the scanner to the vehicle’s 16 pin Data Link Connector (DLC)
with the diagnostic cable.
3. Boost the device and select BRT; it will display all the vehicle makes
available. Choose your vehicle make and follow the scanner instruction to
start.
● Sensor calibration on Honda EPB vehicles - allows to program the
current output value of each sensor into the electric parking brake unit.
● Perform BRT on Citroen/Peugeot cars - make several selections to
confirm your car model, and then complete the battery replacement
following on-screen instructions.
● Perform BRT on Audi/VW/Seat/Skoda cars - after communicating with
vehicles, there’s two options under Replace battery menu - Validate
battery and Display data.
- Validate battery menu lets you to recode the new battery to the vehicle’s
ECU and to turn off dashboard warning lights. The on-screen instructions
would guide you step by step to complete the replacement.
- Display Data menu lets you to check the battery information or battery
replacement records
Loading ...
Loading ...
Loading ...