BRITAX E1C903Y One4life Convertible Car Seat, 10 Years Of Use From 5 To 120 Pounds, Converts From Rear-facing Infant Car Seat To Forward-facing Booster Seat, Machine-washable Fabric, Iris Onyx

User Manual - Page 7

For E1C903Y.

PDF File Manual, 52 pages, Read Online | Download pdf file

E1C903Y photo
Loading ...
Loading ...
Loading ...
5
The primary protection for occupants of a vehicle in a
collision is the body of the vehicle itself; a child seat will
not protect a child when a vehicle is seriously impacted.
However, correctly installed, a child seat will substantially
improve chances for survival in most crashes. Make sure
all users fully understand the correct ways to use this child
seat in a vehicle.
Important Notes
Britax strongly recommends that children should remain
in a child seat with a 5-point harness until reaching the
maximum weight or height allowed.
To prevent injury due to deterioration or hidden damage,
discontinue use of this child restraint if it is
older than ten
(10) years. See the Serial Number and Manufactured Date
Label on the child restraint.
Before each use, check this child restraint and its
components to make sure they are in good condition and
good working order.
Discontinue use of this child restraint if it has been in a
moderate or severe crash. It is not necessary to replace
a child restraint after a minor crash, dened by the US
National Highway Trafc Safety Administration (NHTSA)
as:
a. The vehicle is drivable from the crash site; and
b. The vehicle door nearest to the child restraint was
not damaged; and
c. No vehicle occupants were injured; and
d. There is no visible damage to the child restraint; and
e. The airbags (if present) did not deploy.
ALWAYS make sure the child restraint system is secured
to the vehicle, even when unoccupied, since in a crash, an
unsecured child restraint system may injure occupants.
Verify that the child restraint and child restraint belts or
straps do not interfere with the opening and closing of the
vehicle door.
Consult vehicle user guide to ensure child restraint
installation does not interfere with function of vehicle
seats.
Snugly adjust the belts provided with the child restraint
around your child.
Ensure the lower harness (waist) straps are rmly adjusted
in a position so that the child’s pelvic area is secure.
Ensure the upper harness (shoulder) straps are rmly
adjusted so that the child is secure.
The use of non-Britax covers, inserts, toys, accessories
or tightening devices is not approved by Britax. Their use
could cause this child restraint not to perform as intended
in a crash.
Cover the child restraint when the vehicle is parked in
direct sunlight. Metal parts of child restraint could become
hot enough to burn a child.
Loading ...
Loading ...
Loading ...