Loading ...
Loading ...
Loading ...
21
6. Ensure that no more than
3 in (7.5 cm) of the base
hangs over the front edge
of the vehicle seat.
7. Slide the lower
connector strap into the
REAR-facing belt path
marked by blue labels.
8. Firmly press the lower
connectors onto their
adjacent lower anchors.
9. Ensure the connector
strap is not twisted. Pull
the end of the lower
connector strap to
remove slack.
10. Close the CLICKTIGHT
over the lower
connector strap.
11. Ensure both red
CLICKTIGHT release
buttons are visible.
NOTE: If it is difficult to close,
you may have removed too
much slack.
3 in3 in
ADJUSTMENT
SLOT
NOTE: Do not install by this method for a child weighing
more than 30 pounds (13.5 kilograms).
Loading ...
Loading ...
Loading ...