BRITAX E1C903Y One4life Convertible Car Seat, 10 Years Of Use From 5 To 120 Pounds, Converts From Rear-facing Infant Car Seat To Forward-facing Booster Seat, Machine-washable Fabric, Iris Onyx

User Manual - Page 26

For E1C903Y.

PDF File Manual, 52 pages, Read Online | Download pdf file

E1C903Y photo
Loading ...
Loading ...
Loading ...
24
9 Both red CLICKTIGHT release buttons are visible after installation.
9 All connections are secure and vehicle belt is not twisted.
9 Vehicle belt is locked as directed by your vehicle owner’s manual.
9 Car seat base MUST be flat on vehicle seat and MUST be parallel to
vehicle seat.
9 Recline indicator is still within the correct section for
REAR-facing after
child is secured.
9 Child restraint cannot be moved front to back or side to side more than
1 in. (2.5 cm) at the belt path.
9 Excess top tether webbing is contained within your vehicle and secured.
NOTE: If the child restraint does not meet the above
criteria, repeat the installation steps or use a different
seating location in your vehicle.
FORWARD-Facing Installation Harness Mode
Britax strongly recommends:
children should ride REAR-facing until they exceed the
weight or height limits specified.
the top tether be used at ALL times when installing the
child restraint FORWARD-facing. Using the top tether
will improve the stability of your child restraint and
reduce the risk of injury.
Use
FORWARD-facing only:
with harness straps in closest
position above the child’s
shoulder, and
with children weighing 22 - 65 lb
(10 - 29.5 kg), and
who are 49 in (124.5 cm) or less in
height, and
when the top of the ears are
below the top of headrest.
IMPORTANT: Anti-rebound bar MUST be removed
FORWARD-facing.
Installation with Vehicle Lap-Shoulder Belt (Preferred Method)
1. Extend the top tether strap
by lifting on the top tether
adjuster.
Loading ...
Loading ...
Loading ...