Loading ...
Loading ...
Loading ...
37
Harness Mode to Booster Mode
NOTE: It is not necessary to use lower anchors and top
tether to position this child restraint in BOOSTER mode.
If using the lower anchors and top tether to position this
child restraint in BOOSTER mode, it is recommended to
follow BOOSTER Mode Installation before storing the
harness. Refer to page 31 Using Lower Anchors and
Top Tether (LATCH) in BOOSTER Mode.
1. Raise the headrest to the
highest position.
2. Loosen the harness. Press
the harness release button
(A) and pull both harness
straps forward (B).
NOTE: Make sure enough
harness adjuster strap is left
hanging from the front of the
seat. Use the inner slot as a
reference point to measure
how much harness strap can
be left hanging from the front
of the seat.
Before traveling, verify that the:
9 Vehicle belt is not twisted.
9 Shoulder part of vehicle belt is routed through the shoulder belt guide
above the child’s shoulder, lies across the center of the child’s chest and
does not contact the child’s neck.
9 Lap part of the vehicle belt is routed low across the child’s upper thighs.
Inner Slot
B
A
B
A
7. Ensure the shoulder part
lays across the center of
the child’s chest, above
the child’s shoulder and
does not contact the child’s
neck (A). The lap part of the
vehicle belt is routed low
across the child’s upper
thighs (B).
Switching between Harness and Booster Mode
Loading ...
Loading ...
Loading ...