Loading ...
Loading ...
Loading ...
Problem solving guide
72
Problem Cause and remedy
Empty the drip tray and the
waste container appears
in the display, even
though the drip tray has
been emptied.
This is not a fault. The drip tray was not properly
removed and/or replaced too quickly.
Insert the drip tray and the
waste container appears
in the display even
though both are fitted.
The drip tray is not in the correct position and is
therefore not detected.
Empty the drip tray and the waste container.
Reassemble all parts and push the drip tray back
as far as it will go in the coffee machine.
The waste container is
overflowing even
though the drip tray and
waste container have
been emptied following
each reminder.
The drip tray has probably been removed without the
waste container being emptied.
Removing the drip tray resets the internal counter for
emptying the waste container.
Always empty the waste container if you remove
the drip tray.
Certain types of beans produce a lot of coffee when
they are ground, meaning that larger coffee pucks
are pressed.
Adapt the quantity of coffee and grinder setting if
necessary.
Empty the waste container more often than
indicated in the display.
Fill the bean container ap-
pears in the display
even though the bean
container has just been
filled.
This is not a fault.
Confirm the message with OK.
Insufficient coffee beans are getting into the grinder.
Have you used a dark roast?
This type of coffee bean is often more oily. These oils
can cling to the inside of the coffee bean container
and hinder the flow of beans.
Make a coffee and observe whether the coffee
beans drop into the coffee bean container.
Clean the coffee bean container more often if you
are using a darker, more oily bean.
Try other types of coffee bean which are less oily.
The coffee machine
does not rinse itself
when turned on.
This is not a fault.
If the coffee machine is already at operating
temperature, rinsing will not take place.
Loading ...
Loading ...
Loading ...