Loading ...
Loading ...
Loading ...
Problem solving guide
71
Problem Cause and remedy
Fill and replace the water
container appears after
switching on even
though the container is
filled and fitted in the
machine. The appliance
does not rinse.
The coffee machine needs descaling.
Switch the coffee machine off with the On/
Offbutton. Wait approx. 1hour.
Switch the appliance back on again. As soon as
Heating-up phase appears, touch the sensor
control and then select Descale the appliance.
Descale the coffee machine.
After switching on the
machine the message
Empty the drip tray and the
waste container appears
even though they are
both empty.
This is not a fault.
When the drip tray and waste container are
emptied, the internal counter is not reset after the
coffee machine has been switched off. Empty the
drip tray and the waste container appears in the display
even though the drip tray and the waste container
are not filled to the maximum.
Neither milk nor milk
froth comes out of the
central spout.
The milk pipework was connected incorrectly to the
central spout.
The seam on the milk pipework, central spout and on
the rinse valve makes it easier to assemble.
Check whether the milk pipework is correctly
connected to the central spout.
The milk pipework is blocked.
Clean the central spout and milk pipework
carefully with the brush.
Loading ...
Loading ...
Loading ...