Loading ...
Loading ...
Loading ...
Problem solving guide
70
Unusual performance of the coffee machine
Problem Cause and remedy
The display remains
dark when the coffee
machine is turned on
using the On/Offbut-
ton.
The On/Offbutton was not held for long enough.
Touch and hold the On/Offbutton for at least
3seconds.
The plug is not inserted in the socket correctly.
Insert the plug into the socket.
The fuse has tripped because the coffee machine,
voltage or another appliance is defective.
Switch off at the wall socket and unplug the coffee
machine.
Contact a qualified electrician or the Miele
Customer Service Department.
The coffee machine
turns off suddenly.
The factory set switch-off time (20minutes) or the
switch-off time you have programmed has been
reached.
If required, you can select a new switch-off time
(see “Settings – Timer”).
The plug is not inserted in the socket correctly.
Insert the plug into the socket.
The sensors do not re-
act to touch.
The coffee machine
cannot be operated.
There is an internal fault.
Disconnect the machine from the power supply by
removing the plug from the socket.
The display is hard to
see or not able to be
read.
The display brightness has been set too low.
Change this setting (see “Settings”).
Fill and replace the water
container appears in the
display even though the
water container is full
and in the machine.
The water container is not in the correct position.
Remove the water container and push it back in
again.
Remove and clean the water container filter (see
“Cleaning and care – Removing and cleaning the
water container filter”).
The water container was not correctly filled and
refitted for descaling.
Fill the water container to the descaling symbol
and restart the descaling programme.
Loading ...
Loading ...
Loading ...