Loading ...
Loading ...
Loading ...
ww_. GEAppliances.com
Possible Causes What ToDo
You forgot to enter a • Touch tile BAKEpad and desired temperature or
bake temperature or tile SELFCLEAN LO/STB pad and desired clean time.
cleaning time.
A fuse in your home may be • Replace the fuse or reset the circuit bmaken
blown or the circuit
breaker tripped.
The clock is in the • See the Special features of your oven control section.
black-out mode.
Power failure. • Reset tile clock.
! !
Oven control pads were • The BROIL HI/LO and BAKE pads must be touched at
not touched properly, tile same time and held for 3 seconds.
This is reminding you to • Enter a probe temperature.
th_displa_ enter a probe temperature
(on_omemo after plugging in the probe.
Power outage or surge. • Reset tile clock. If the oven was in use, you must reset
it by touching the CLEARIOFFpad, setting the clock
and resetting any cookingflmction.
• This is normal.
When using the convection
feature, it is normal to see
steam coming out of the oven
vent. As the number of racks
or amount of food being
cooked increases, the amount
of visible steam will increase.
This is normal in a new oven • To speed the process, set a self-clean cycle for a
and will disappear in time. minimum of 3 hotlFS. See the Using the self-cleaning
oven section.
An odor from the iusulation • This is tempera W.
around the inside of the oven
is normal for the first few times
the oven is used.
A cooling fan or a convection • This is normal. The cooling fan will turn offand on
fan (depending on the re cool internal parts. It may run after tile oven is
function you are using) may turned OFF. The convection tan will cycle on and off.
automatically turn on and off. until the function is over or the door is opened.
39
Loading ...
Loading ...
Loading ...