Loading ...
Loading ...
Loading ...
Usingtheself-cleaning oven.
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
How to Delay the Start of Cleaning
[] Touch the SELFCLEANLO/STDpad
once for a 4-hour clean time or
twice for a 3-hour clean time.
A 3-hour self-clean time is
recommended for use when
cleaning small, contained spills. A
self-dean time o/'4 hours or longer
is recommended for a dirtier oven.
Ka time other than 4 hours or
3 hours is needed, use the number
pads and enter the desired clean
tirl3e.
........................................ You can change tile clean time to any
time between 3 hours and 5 hours,
depending on how dirty your oven is.
[] Touch the DE/atYSTARTpad.
[] Using tile number pads, enter tile
time of day you want the clean cycle
to starL
The door locks automatically. The display
will show the start time. It will not be
possible to open the oven door until
the temperature drops helow the lock
temperature and the LOCKEDlight goes
off.
When the LOCKEDlight goes off, you will
be able to open the door.
[] Touch the START pad.
After a Clean Cycle
You may notice some white ash in the
oven. Wipe it up with a damp cloth after
the oven cools.
tf whitespotsremain,removethemwithasoap-
filledsteelwoolpadandrinsethoroughlywitha
vinegarandwatermixture.
These deposits are usually a salt residue
that cannot be removed by the clean
cycle.
If the oven is not clean after one clean
cycle, repeat the cycle.
/;55You cannot set the oven J[brcooking
until the oven is cool enough for the
door to unlock.
/;)5While the oven is self-cleaning, you can
touch the CLOCKpad to display the
time of day. To return to the clean
countdown, touch the SELFCLEAN
LO/STDpad.
N tithe racks become hard to slide, apply
a small anmunt of cooking oil to a
paper towel and wipe the edges of the
oven racks with the paper towel.
24
Loading ...
Loading ...
Loading ...