Loading ...
Loading ...
Loading ...
Other Settings
This section explains other watch settings you
can configure.
Enabling the Button
Operation Tone
Use the procedure below to enable or disable
the tone that sounds when you press a button.
●
[MUTE] is displayed while the button
operation tone is disabled.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
Release the button when [SET] stops
flashing.
3. Press (C) eight times so [KEY♪] or [MUTE]
is flashing on the display.
4. Press (D) to toggle the button operation
tone between enabled and disabled.
[KEY♪]: Operation tone enabled.
[MUTE]: Operation tone disabled.
5. Press (A) to exit the setting screen.
Returning the Watch to Its
Factory Default Settings
This section explains how to return the watch
settings below to their initial factory defaults.
●
Watch Settings
●
Pedometer
●
Stopwatch
●
Timer
●
Alarm
1. Hold down (C) for at least two seconds to
enter the Timekeeping Mode.
2. Hold down (A) for at least two seconds.
Release the button when [SET] stops
flashing.
3. Press (C).
This causes the seconds to flash.
4. Hold down (E) for at least five seconds.
Release the button when [RESET ALL]
stops flashing.
5. Press (A) to exit the setting screen.
Note
●
Resetting the watch will also delete
information for pairing the watch with a
phone, and unpair them.
Moving to Another Time
Zone
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
● Before Boarding
1. Configure the World Time (Dual Time)
setting to the current time at your
destination.
Destination time
Current time
l
Using G-SHOCK Connected to
Configure Settings
l
Using Watch Operations to Configure
Settings
2. Disable auto time adjustment.
l
Using the Watch in a Medical Facility or
Aircraft
Operation Guide 3486
18
Loading ...
Loading ...
Loading ...