Loading ...
Loading ...
Loading ...
2. Use (D) and (E) to specify the number of
auto repeats.
3. Press (C).
4. Use (D) and (E) to specify the position of
the timer in the sequence.
●
To specify the first position, set [1].
5. Press (C).
This causes the minutes digits of Timer 1
to flash.
6. Use (D) and (E) to change the timer
minutes setting.
Minutes
7. Press (C).
This causes the seconds digits of Timer 1
to flash.
8. Use (D) and (E) to change the timer
seconds setting.
Seconds
9. Press (C) twice.
This returns to the screen in step 4.
10. Repeat steps 4 through 9 as many times
as necessary to configure the settings of
the other timers.
11. Press (A) to exit the setting screen.
Using an Interval Timer
1. Press (D) to start the countdown.
The watch beeps every second for the last
five seconds of the current countdown,
and starts the countdown of the next timer
when the end is reached.
●
To pause an ongoing timer countdown,
press (D). To reset a paused
countdown to the start time, press (E).
●
When there is a multiple timer
countdown operation in progress, you
can immediately terminate the current
countdown and start the next
countdown by holding down (A) for at
least 0.5 seconds.
Dual Time
Dual Time lets you look up the current time in
various time zones around the globe.
Getting Ready
Enter the Dual Time Mode.
l
Navigating Between Modes
Configuring Dual Time
Settings
Dual Time lets you set the current time in
another time zone in addition your current
location time.
1. Hold down (A) for at least two seconds.
Release the button when the hour digits
start to flash.
Hours
2. Use (D) and (E) to change the hour setting.
3. Press (C).
This causes the minutes digits to flash.
Minutes
4. Use (D) and (E) to change the minute
setting.
●
You can change the setting in 15-
minute increments.
5. Press (A) to exit the setting screen.
Operation Guide 3486
14
Loading ...
Loading ...
Loading ...