Loading ...
Loading ...
Loading ...
● Interpreting Indicated Stopwatch
Values
Elapsed time is shown in 1/100-second units
for the first hour of the measurement. After the
first hour, elapsed time is shown in one-
second units.
Hours
Minutes
Minutes
Seconds
Seconds
Seconds
1/100 seconds
Stopwatch number Stopwatch number
Minutes
After first hourFirst hour
Measuring a Split or Lap Time
1. Select the information you want to display.
l
Swapping the Display Positions of the
Split Time and Lap Time
2. Use the operations below to measure
elapsed time.
●
Each press of (E) displays the time
elapsed from the start of the stopwatch
operation up to that point (split time) and
the elapsed time for a specific segment
(lap time).
D
E
D
Stop
Split/lap
Start
3. Press (E) to reset the elapsed time to all
zeros.
● Interpreting Indicated Stopwatch
Values
Split times and lap times are both displayed at
the same time. Lap and split times up to the
one hour are shown in 1/100-second units.
Subsequent measurements after one hour are
shown in 1-second units.
[SPL]: Split time
[LAP]: Lap time
Hours
Minutes
Minutes
Seconds
Seconds
Seconds
1/100 seconds
Stopwatch number Stopwatch number
Minutes
After first hourFirst hour
Swapping the Display
Positions of the Split Time
and Lap Time
While the stopwatch is reset to all zeros, hold
down (E) for at least two seconds to swap the
lap and split time display locations.
Lap time
Split time
Lap time
Split time
Displaying the Current Time
During Stopwatch
Measurement
Pressing (A) displays the current timekeeping
time in the lower display. Pressing (A) again
returns to the normal stopwatch display.
Current time
Measurement
Measurement
Using the Target Time Alarm
Overview
After you configure one or more target times,
the watch will beep and display an alert to let
you know when the elapsed time reaches a
target time.
If you want to try running five kilometers in 30
minutes, for example, you could set the target
times shown below and monitor your pace for
each kilometer.
Target Time 1: 6 minutes
Target Time 2: 12 minutes
Target Time 3: 18 minutes
Target Time 4: 24 minutes
Target Time 5: 30 minutes
Specifying a Target Time
You can specify up to 10 target times, each of
which can be up to 24 hours, in one-second
units.
●
If you want to specify multiple target times,
specify the smallest time as Target Time 1,
and the successive times in ascending
order (Target Time 2, Target Time 3, etc.)
1. While the stopwatch is reset to all zeros,
hold down (A) for at least two seconds.
Release the button when [TGT] appears.
●
You can toggle the Target Time function
between enabled and disabled by
pressing (D).
2. Press (C).
3. Use (D) and (E) to select a target time
number.
Target time number
4. Press (C).
Operation Guide 3486
10
Loading ...
Loading ...
Loading ...