Loading ...
Loading ...
Loading ...
16
2.4 MultiClient Integrated KVM
1
What is it?
With MultiClient Integrated KVM switch,
you can control two separate PCs with
one monitor-keyboard-mouse set up.
2
How to enable MultiClient Integrated
KVM
With the built-in MultiClient Integrated
KVM, Philips monitor allows to quickly
switch your peripherals back and forth
between in two devices through the OSD
menu setting.
Use USB-C and HDMI or DP as input,
then use USB-C/USB-B as USB upstream.
Please follow the steps for the settings.
1. Connect the USB upstream cable
from your dual devices to the “USB
C” and “USB UP” port of this monitor
at the same time.
Source USB Upstream
HDMI/DP USB UP
USB C USB C
2. Connect peripherals to the USB
downstream port of this monitor.
1
1
2
PC1
PC2
HDMI 1 HDMI 2
USB UP
USBC
USB USB
OR OR
3. Enter to OSD menu. Go to KVM
layer and select “Auto”, “USB C”
or “USB Up” to switch the control
of peripherals from one device to
another. Simply repeat this step for
switching the control system using
one set of peripheral.
SmartImage
Resolution
5120X1440 240Hz HDMI 1 On Standard
Refresh Rate Input Source Adaptive Sync SmartImage
Select
High Resolution
O
Auto
Game Mode Input Audio System Setup Close
OK
Back
Ambiglow
HDMI Refresh Rate
OSD Setting
PIP/ PBP
Auto
USB C
USB Up
Smart Size
USB Setting
Smart Power
Over Scan
USB Standby Mode
USB-C Setting
KVM
ambiglow
Use DP and HDMI as input then use
USB-B/USB-C as USB upstream.
Please follow the steps for the settings.
1. Connect the USB upstream cable
from your dual devices to the “USB
C” and “USB UP” port of this monitor
at the same time.
PC1: USB UP as upstream and HDMI or DP
cable for both video and audio transfer.
PC2: USB-C as upstream (USB C-A) and DP
or HDMI for both video and audio transfer.
Source USB Upstream
HDMI or DP USB UP
DP or HDMI USB C
2. Connect peripherals to the USB
downstream port of this monitor.
USBC
1
1
2
PC1 PC2
HDMI 1 HDMI 2
USB UP
USB USB
OR
HDMI 1 HDMI 2
OR
OR
OR
Loading ...
Loading ...
Loading ...