Loading ...
Loading ...
Loading ...
Use To
Security Reset Jumper
Access controls=”No Security”
No
Eect
Reset factory security defaults
Adjust the security settings.
Notes:
• “Access controls=’No Security’” retains all the security information that
the user has defined. “No Security" is the factory default setting.
• “No Eect” means the reset has no eect on the printer security
configuration.
• “Reset factory security defaults” deletes all security information that the
user has defined, and restores the factory default settings in the
Miscellaneous Security menu.
LDAP Certificate Verification
Demand
Try
Allow
Never
Allow the user to request a server certificate.
Notes:
• “Demand” means a server certificate is requested. If a bad certificate is
provided or if no
certificate
is provided, then the session is terminated
immediately. “Demand” is the factory default setting.
• “Try ” means a server certificate is requested. If no certificate is provided,
then the session proceeds normally. If a bad
certificate
is provided, then
the session is terminated immediately.
• “Allow” means a server certificate is requested. If no certificate is
provided, then the session proceeds normally. If a bad certificate is
provided, then it will be ignored and the session proceeds normally.
• “Never” means no server certificate is requested.
Minimum PIN Length
1–16
Limit the digit length of the personal identification number (PIN).
Note: 4 is the is the factory default setting.
Confidential
Print menu
Menu item Description
Max Invalid PIN
O
2–10
Limits the number of times an invalid PIN can be entered
Notes:
• This menu appears only if a formatted, non-defective printer hard disk is
installed.
• Once the limit is reached, the print job for that user name and that PIN are
deleted.
Confidential Job Expiration
O
1 hour
4 hours
24 hours
1 week
Limits the amount of time a confidential print job stays in the printer before it is deleted
Notes:
• If the Job Expiration setting is changed while confidential print jobs reside on
the printer RAM or printer hard disk, then the expiration time for those print
jobs does not change to the new default value.
• If the printer is turned o, then all confidential jobs held in printer RAM are
deleted.
Note: O is the factory default setting.
Understanding the printer menus 117
Loading ...
Loading ...
Loading ...