Loading ...
Loading ...
Loading ...
Menu item Description
IP Address Lets you view or change the current TCP/IP address
Note: Manually setting the IP address sets the Enable DHCP and Enable Auto
IP settings to
O.
It also sets Enable BOOTP and Enable RARP to
O
on
systems that support BOOTP and RARP.
Netmask Lets you view or change the current TCP/IP netmask
Gateway Lets you view or change the current TCP/IP gateway
Enable DHCP
On
O
Specifies the DHCP address and parameter assignment setting
Note: On is the factory default setting.
Enable RARP
On
O
Specifies the RARP address assignment setting
Note:
O
is the factory default setting.
Enable BOOTP
On
O
Specifies the BOOTP address assignment setting
Note: On is the factory default setting.
Enable AutoIP
Ye s
No
Specifies the Zero Configuration Networking setting
Note: Yes is the factory default setting.
Enable FTP/TFTP
Ye s
No
Enables the built-in FTP server, which allows you to send files to the printer using
File Transfer Protocol.
Note: Yes is the factory default setting.
Enable HTTP Server
Ye s
No
Enables the built-in Web server (Embedded Web Server). When enabled, the
printer can be monitored and managed remotely using a Web browser.
Note: Yes is the factory default setting.
WINS Server Address Lets you view or change the current WINS server address
DNS Server Address Lets you view or change the current DNS server address
Backup DNS Server Address View or change the backup DNS server addresses.
Backup DNS Server Address 2
Backup DNS Server Address 3
IPv6 menu
Note: This menu is available only in network models or in printers attached to print servers.
This menu is available from the Network/Ports menu:
Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > IPv6
Menu item Description
Enable IPv6
On
O
Enables IPv6 in the printer
Note: On is the factory default setting.
Understanding the printer menus 106
Loading ...
Loading ...
Loading ...