Loading ...
Loading ...
Loading ...
support@anmeate.com
11. MAINTENANCE
A high-pitched
Noise is Heard
No Sound on the
Parent Unit
Image Freezes
Temperature is
Inaccurate
Can not Connect with
Multiple Baby Unit
1. The baby unit and parent unit may be place too close together.
Keep the distance between parent unit and the baby unit
.
2. The volume on the parent unit may be set too high.
Turn down the volume on the parent unit.
3. If the above strategies do not work, restart the parent unit.
1. Pair the baby unit in wrong ways.
Refer to 3.1 Paring More than one baby unit with parent unit
.
2. If the above strategies do not work, restart the parent unit.
1. The temperature sensor is positioned very close to the baby unit
and when it warms up the during operation.
Stretch out the senor so it would be far enough from the baby unit
Place the baby unit in an area with good air circulation
.
2. If the above strategies do not work, restart the parent unit.
1. Volume may be set too low.
Turn up the volume on the parent unit
.
2. If the above strategies do not work, restart the parent unit.
Restart the baby unit(plug out the adapter then plug it into the socket again)
Press the reset key at the back of the parent unit(hide behind the stand)
Clean the surfaces of the camera and monitor with a soft, flu-free cloth.
Never use cleaning agents or solvents.
If the units become dirty, use a lightly dampened cloth to wipe surfaces,
taking care to not allow water into any openings.
- 19 -
Loading ...
Loading ...
Loading ...