Loading ...
Loading ...
Loading ...
SPEC IAL IN STALLATI'O NS
CABINETS LESS THAN 30" HIGH
FRAM ELESS CABI N ETS
ADJUST HOOD
HEIGHT TO
MATCH CABINET
HEIGHT
1. AdjuSt hood and door frame height to match cabinet
height.
2. Duct length for a 30" high cabinet should be 14-3/4"
from rough, in plate. Trim back duct for lesser heights,
accordingly. Example: 28" cabinet height requires
duct length of 12-3/4".
314"
1. Construct a panel as shown above. Attach it to door
frame with ten screws.
2. Attach doors.
NOTE: If cabinet doors use concealed hinges, mount
to panel using hinges designed for face-mounting,
EXPOSED END
3. FOR HOODS 24" THROUGH 27" HIGH ONLY:
Place a sheet metal nut over each slide, where shown,
to prevent bottom of door from coming completely out
of hood. Tighten in place.
I
(I) o=_
(D) (_)
I
1/4" THICK WOOD PANEL
1. Attach a 1/4" thick end panel with six screws and
washers and notch for frame clearance, as shown.
Loading ...
Loading ...
Loading ...