INSTRUCTION/INSTALLATION SHEET
Electric Metal Box
A:Mounting Plate Installation:
Adopts 4pcs M8 hex head flange nut assembly mounting
plate with box body.
Notice:already assembled on box body when ex-factory.
B:Bottom Sealing Plate Installation:
Adopts M5*10mm cross self-tapping screws assembly sealing washer,
bottom sealing plate with box body.
according to your usage requirement to mount it or not.
C:Wall Mounting Pendants Installation:
Adopts 4pcs M8*16mm hex head bolt,M8 O-ring,M8 nuts mounting
4pcs wall mounting pendants on the wall.
E:Box Door Installation:
Adopts 1pcs M6*12mm flat head cross screw,M6 O-ring,
M6 hex head flange nut assembly hinge on box body,
Adopts fixed pin assembly box door on hinge.
Notice:box door already assembled on box body when ex-factory.
F:Door Lock Installation:
Adopts lock nuts assembly box lock on box door.adopts
matched key to meet box door open and close.
Notice:already assembled on box body when ex-factory.
D:Grounding Wire Installation:
Adopts 2pcs M6 hex head flange nut assembly grounding wire
on M6*12mm copper bolt of box door and box body.
Notice:already assembled on box body when ex-factory.
Please read the
following twosheets
if you need change
box door and
box lock
Warning:when lock the box door,please turn lock core 90°from vertical direction to horizontal direction,make sure meet best protection level.
