MAVIC 3 CLASSIC User Manual

Loading ...

DJI Mavic 3 Classic User Manual

Flight Pause/RTH Button

Press once to make the aircraft brake and hover in place. Press and hold the button until the

remote controller beeps to start RTH, the aircraft will return to the last recorded Home Point.

Press this button again to cancel RTH and to regain control of the aircraft.

Customizable Buttons

Go to System Settings in DJI Fly and select Control to set the functions of the customizable C1

and C2 buttons.

Status LED and Battery Level LEDs Description

Status LED

Blinking Pattern Description

—

Solid red Disconnected from the aircraft

Blinking red The battery level of the aircraft is low

—

Solid green Connected with the aircraft

Blinking blue The remote controller is linking to an aircraft

—

Solid yellow Firmware update failed

—

Solid blue Firmware update successful

Blinking yellow The battery level of the remote controller is low

Blinking cyan Control sticks not centered

Battery Level LEDs

Blinking Pattern Battery Level

75%~100%

50%~75%

25%~50%

0%~25%

Remote Controller Alert

The remote controller beeps when there is an error or warning. Pay attention when prompts

appear on the touch screen or in DJI Fly. Slide down from the top and select Mute to disable all

alerts, or slide the volume bar to 0 to disable some alerts.

Loading ...

Dji MAVIC 3 CLASSIC