Dji MAVIC 3 CLASSIC

User Manual - Page 38

For MAVIC 3 CLASSIC.

PDF File Manual, 94 pages, Download pdf file

Loading ...
Loading ...
Loading ...
DJI Mavic 3 Classic User Manual
38
©
2022 DJI All Rights Reserved.
All the settings except camera action can be applied to all waypoints after selecting Apply to
All. Tap the delete icon to delete a waypoint.
3. POI Settings
Tap POI on the operation panel to switch to POI settings. Use the same method to pin a POI
as used with a waypoint.
Tap the number of the POI to set the altitude of the POI. The POI can be linked to a waypoint.
Multiple waypoints can be linked to the same POI, the camera will point toward the POI
during the Waypoint Flight.
4. Plan a Waypoint Flight
Tap
to plan a Waypoint Flight. Tap Next to adjust the Global Speed, the behavior of End
of Flight, On Signal Lost, and Start Point. The settings apply to all waypoints.
5. Perform a Waypoint Flight
Check the Obstacle Avoidance settings in the Safety section of DJI Fly before
performing the Waypoint Flight. When set to Bypass or Brake, the aircraft will brake
and hover in place if an obstacle is detected during the Waypoint Flight. The aircraft
cannot avoid obstacles if Obstacle Avoidance is disabled. Fly with caution.
Observe the environment and ensure there are no obstacles on the route before
performing Waypoint Flight.
Make sure to maintain visual line of sight (VLOS) with the aircraft. Press the flight
pause button in an emergency situation.
• Tap
GO
to upload the waypoint flight task. Tap the
button to cancel the uploading
process and return to the waypoint flight edit status.
The waypoint flight task will be performed after uploading, the flight duration, waypoints,
and distance and will be displayed on the camera view. The control stick input will change
the flight speed during a Waypoint Flight.
• Tap
to pause the Waypoint Flight after the task begins. Tap to stop Waypoint Flight
and return to the waypoint flight edit status. Tap
to continue the Waypoint Flight.
When the signal is lost during flight, the aircraft will perform the action set in On
Signal Lost.
When the Waypoint Flight is finished, the aircraft will perform the action set in End
of Flight.
6. Library
When planning a Waypoint Flight, the task will be generated automatically and saved every
minute. Tap the list icon on the left to enter Library and save the task manually.
Loading ...
Loading ...
Loading ...