Loading ...
Loading ...
Loading ...
29
ENG
Remove the rinse reservoir cap by lifting up the handle .
Pour the rinse aid into the dispenser, being careful not
to overfill.
Close the cap after all.
Filling The Rinse Aid Reservoir
Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is designed to adjust the
consumption by user. Follow the below steps.
1. Close the door, Switch on the appliance.
2. Within 60 seconds after step 1, press the program button more than 5 seconds, and then press the half-load
Button to enter the set model, the rinse aid indication blinks as 1Hz frequency.
3. Press the program button to select the proper set according to your using habits , the sets will change in the
following sequence: D1->D2->D3->D4->D5->D1, Dispenser drops more rinse aid in D5 level than in another,
the manufactory setting is D3.
4. Press the Power button to end the setup model.
Selector position Amount of rinse aid (mL)
D1-> rapid Light bright 1.2
D2-> 90min Light bright 2.4
D3-> 90min, rapid Light bright 3.6
D4-> ECO Light bright 4.8
D5-> ECO, rapid Light bright 6.0
Loading ...
Loading ...
Loading ...