Loading ...
Loading ...
Loading ...
62
REVISION HISTORY
REV
DESCRIPTION
DATE
APPROVED
TITLE
SIZE
Customer
DWG NO
REV
SCALE SHEET
Finish
N/A
B
End Panel to Grill Bracket Package
-
Engineering Release
01/01/2020
Todd Stone
37 Adams Blvd., Brantford, Ontario, N3S 7V8
P: (519) 751-1800 www.crownverity.com
1:7.5
2 of 2
-
IB-EP-IGM
Crown Verity
K Factor
Weight (Kg)
Gauge
N/A
N/A
N/A
DRAWN BY:
Todd Stone
Material
SS 304
01/01/2020
Dimensions are in inches
Linear Tolerance: +/- .015
Bend Tolerance: +/- .020
Angular Tolerance: +/- 0.5
Radial Tolerance: +/-.005
Copyright 2020 Crown Verity Inc. All rights reserved. Unauthorized duplication is a violation of applicable laws.
D
E
F
Detail D
SCALE 1 : 1.88
Detail E
SCALE 1 : 1.88
Detail F
SCALE 1 : 1.88
TYPICAL 4 PLACES
Grill shown with front
face removed for
clarity
Grill shown with back
panel removed for
clarity
The end panel is connected
to the top front of the grill at
this position. Do not
overtighten the screw.
The end panel bracket connects
the rear of the grill to the end panel
at this position. The bracket hooks
behind the panel and is bolted in
place from the front.
The end panel bracket is attached to the back
of the grill at this position. Ensure the end
panel is pushed tight against the side of the
grill before tightening the bolt.
The end panel is attached to the grill
cabinet four places. Position the
hardware but do night tighten it until
the end panel is aligned with the grill
Loading ...
Loading ...