Loading ...
Loading ...
Loading ...
59
REVISION HISTORY
REV
DESCRIPTION
DATE
APPROVED
TITLE
SIZE
Customer
DWG NO
REV
SCALE SHEET
Finish
N/A
B
-
Engineering Release
01/01/2020
Todd Stone
37 Adams Blvd., Brantford, Ontario, N3S 7V8
P: (519) 751-1800 www.crownverity.com
1:7.5
2 of 2
-
Crown Verity
K Factor
Weight (Kg)
Gauge
N/A
N/A
N/A
DRAWN BY:
Todd Stone
Material
SS 304
01/01/2020
Dimensions are in inches
Linear Tolerance: +/- .015
Bend Tolerance: +/- .020
Angular Tolerance: +/- 0.5
Radial Tolerance: +/-.005
Copyright 2020 Crown Verity Inc. All rights reserved. Unauthorized duplication is a violation of applicable laws.
D
E
F
Detail D
SCALE 1 : 1.88
Detail E
SCALE 1 : 1.88
Detail F
SCALE 1 : 1.88
TYPICAL 4 PLACES
Sink shown with the end
panel removed for clarity
Sink shown with back
panel removed for clarity
The end panel sink bracket
is attached to the front of the
upper sink cabinet 4 places
as shown.
The end panel bracket connects
the rear of the sink to the end
panel at this position. The bracket
hooks behind the panel and is
bolted in place from the front.
The end panel bracket is attached to the back
of the sink at this position. Ensure the end
panel is pushed tight against the side of the
sink before tightening the bolt.
The end panel is attached to the sink
cabinet four places. Position the
hardware but do night tighten it until
the end panel is aligned with the sink
End Panel to Sink
Bracket Package
IB-EP-ICMSK
Loading ...
Loading ...
Loading ...