Loading ...
Loading ...
Loading ...
46
REVISION HISTORY
REV
DESCRIPTION
DATE
APPROVED
TITLE
SIZE
Customer
DWG NO
REV
SCALE SHEET
Finish
N/A
B
ICM Cabinet to ICM-SK Cabinet
00
Engineering Release
01/01/2021
Todd Stone
37 Adams Blvd., Brantford, Ontario, N3S 7V8
P: (519) 751-1800 www.crownverity.com
1:7.5
2 of 2
00
IB-ICM-ICM-SK
Crown Verity
K Factor
Weight (Kg)
Gauge
N/A
N/A
N/A
DRAWN BY:
Todd Stone
Material
SS 304
01/01/2021
Dimensions are in inches
Linear Tolerance: +/- .015
Bend Tolerance: +/- .020
Angular Tolerance: +/- 0.5
Radial Tolerance: +/-.005
Copyright 2021 Crown Verity Inc. All rights reserved. Unauthorized duplication is a violation of applicable laws.
Connection to attachment bracket using
hardware provided. 6 places. Do not
tighten until cabinets are levelled and
aligned at the back.
Align cabinet
flush along the
back seam.
Back panel
removed for clarity
In the assembly shown the base
cabinet (initial starting cabinet)
would be put in place and
levelled on all four legs prior to
attaching the next cabinet.
The attaching cabinet, would be populated with the attachment
brackets. The bottom attachment bracket would rest on the
edge of the base cabinet for support while the hardware was
installed. The hardware would not be tightened until the
attaching cabinet is levelled and flush with the base cabinet.
The attachment brackets provide structural
support for the side of the cabinet that is
attached. Legs are therfore only required
on the opposite cabinet side.
E
Detail E
SCALE 1 : 1.88
5
6
2
30
3
30
Loading ...
Loading ...
Loading ...