Loading ...
Loading ...
Loading ...
5
REVISION HISTORY
REV
DESCRIPTION
DATE
APPROVED
TITLE
SIZE
Customer
DWG NO
REV
SCALE SHEET
Finish
N/A
B
IGM Cabinet to ICC90 Cabinet
00
Engineering Release
01/01/2021
Todd Stone
37 Adams Blvd., Brantford, Ontario, N3S 7V8
P: (519) 751-1800 www.crownverity.com
1:9
2 of 2
00
IB-IGM-ICC90
Crown Verity
K Factor
Weight (Kg)
Gauge
N/A
N/A
N/A
DRAWN BY:
Todd Stone
Material
SS 304
01/01/2021
Dimensions are in inches
Linear Tolerance: +/- .015
Bend Tolerance: +/- .020
Angular Tolerance: +/- 0.5
Radial Tolerance: +/-.005
Copyright 2021 Crown Verity Inc. All rights reserved. Unauthorized duplication is a violation of applicable laws.
D
E
Connection to attachment
bracket using hardware
provided. 4 places. Do not
tighten until cabinets are levelled
and aligned at the back.
Align the back of
the cabinet flush to
the front face of the
door (not shown).
Door removed
for clarity
In the assembly shown the base
cabinet (initial starting cabinet) would
be put in place and levelled on all four
legs prior to attaching the next cabinet.
The attaching cabinet, would be populated with the
attachment brackets. The bottom attachment
bracket would rest on the edge of the base cabinet
for support while the hardware was installed. The
hardware would not be tightened until the attaching
cabinet is levelled and flush with the base cabinet.
The brackets are installed to the
cabinet at 4 mounting points
using the hardware provided.
2
30
3
30
4
24
Detail D
SCALE 1 : 1.88
ZCV-EMC-CP90-1
bracket attaches to
the corner cabinet at
this hole location.
Detail E
SCALE 1 : 1.88
8
1
2
22
3
23
4
19
The connector bracket is attached to the grill at this
location. There is a corresponding mounting hole on the
corner cabinet with the same mounting hardware used.
Install the bracket but do not tighten the hardware until the
cabinets have been aligned and levelled.
Loading ...
Loading ...
Loading ...