Loading ...
Loading ...
Loading ...
60
REVISION HISTORY
REV
DESCRIPTION
DATE
APPROVED
TITLE
SIZE
Customer
DWG NO
REV
SCALE SHEET
Finish
N/A
B
End Panel to Fridge Module Package
-
Engineering Release
01/01/2020
Todd Stone
37 Adams Blvd., Brantford, Ontario, N3S 7V8
P: (519) 751-1800 www.crownverity.com
1:9
1 of 1
-
IB-EP-RF
Crown Verity
K Factor
Weight (Kg)
Gauge
N/A
N/A
N/A
DRAWN BY:
Todd Stone
Material
SS 304
01/01/2020
Dimensions are in inches
Linear Tolerance: +/- .015
Bend Tolerance: +/- .020
Angular Tolerance: +/- 0.5
Radial Tolerance: +/-.005
Copyright 2020 Crown Verity Inc. All rights reserved. Unauthorized duplication is a violation of applicable laws.
A
B
Detail A
SCALE 1 : 1.88
Detail B
SCALE 1 : 1.88
For proper alignment with the
end panel, the end panel should
be flush to the rear of the fridge
module at this position
The ICM-FM requires
the Shorter end panel
IEP-SH.
Item No. Qty Part Number Description
1 1 ICM-FM-3 Fridge Module for LH End Panel
2 3 Washer : Plain - 0.25 x 0.063 Washer : Plain - 0.25 x 0.063
3 3 Washer : Internal Teeth - 0.25 x 0.0255 Washer : Internal Teeth - 0.25 x 0.0255
4 3 Screw : Hex - 0.25 x 0.5 Screw : Hex - 0.25 x 0.5
The back panel has
been removed from
the fridge module
for clarity
The end panel rests on the four hook details
shown. Once in place and aligned with the back
of the fridge module, the screws can be tightened
The end panel brackets for the
fridge module are shown on both
sides for clarity. The standard
configuration would have cabinet
mounting brackets opposite the
end panel brackets.
4
3
2
4
3
2
1
Connect the fridge module bracket
to the end panel two places. Do not
tighten in place until the end panel
has been aligned with the back of
the fridge module
Loading ...
Loading ...
Loading ...