Loading ...
Loading ...
Loading ...
E-71
To record altitude
In the Altimeter Mode, hold
A
for at least two seconds.
• This records the altitude along with the current date and time.
• The watch will return to the Altimeter Mode screen automatically after the save operation is complete.
Advanced Altimeter Mode Operations
Use the information in this section to obtain more accurate altimeter readings, especially while mountain
climbing or trekking.
Note
• To toggle between the altitude differential and current time seconds count, press
C
.
Using an Altitude Differential Value
If you specify a reference altitude, the second hand of the watch will
indicate the difference between the current altitude and the reference
altitude. The displayed altitude differential value is updated each time the
watch obtains a new altitude reading value.
• Depending on the currently selected display range, the allowable
range for the altitude differential value is 100 meters to –100 meters
(100 meters = 328 feet), or 1,000 meters to –1,000 meters (1,000
meters = 3,280 feet).
• If a reading value is outside the allowable range, the second hand will
point to either
+ OVER
or
– UNDER
.
• The second hand will move to 9 o’clock if a reading is outside the
altimeter measurement range (–700 to +10,000 meters), or if a reading
error occurs.
• See “Using the Altitude Differential Value While Mountain Climbing or
Hiking” (page E-72) for some real-life examples of how to use this feature.
Altitude differential
E-70
To specify a reference altitude value
1. In the Altimeter Mode, pull out the crown.
• This will cause the current altitude reading value to fl ash on the
digital
display.
2. Rotate the crown to change the altitude value in one-meter (fi ve-foot)
increments.
• Change the reference altitude value to an accurate altitude reading
th
at you get from a map or other source.
• You can set the reference altitude value within the range of –3,000
to 10
,000 meters (–9,840 to 32,800 feet).
• Pressing
A
an
d
C
at the same time returns to OFF (no reference
altitude value), so the watch performs air pressure to altitude
conversions based on preset data only.
3. After the setting is the way you want, push the crown back in to exit the
setting screen.
Recording Altitude
You can use the procedure in this section to create a record of your current altitude, along with the date
and time of the reading. You can later recall a record to view it.
Important!
• The watch has memory for storage of up to 40 records of various types of data besides altitude data.
Note that recording new data when there are 40 data records in memory causes the oldest record to
be deleted automatically to make room for the new record. See “Viewing Recorded Data” (page E-87).
l
l
l
l
l
l
l
l
l
l
l
l
E-69
• The Altitude Tendency Graph shows changes in altitude over the past 6 readings while readings are
being taken automatically.
50 meters
(10 meters for
each block )
Current
reading
6 readings
ago
Using Reference Altitude Values
To minimize the chance of reading error, you should update the reference altitude value before setting off
on a trek or any other activity where you plan to take altitude readings. During a trek, keep checking the
readings produced by the watch against altitude information provided by markers and other information,
and update the reference altitude value as required.
• Reading error can be caused by changes in barometric pressure, atmospheric conditions, and
elevation.
• Before performing the procedure below, look up the altitude of your current location on a map, the
Internet, etc.
E-68
To take altitude readings
While in the Timekeeping Mode or a sensor mode, use
A
to cycle
through the sensor modes until
ALTI
appears on the display. See
“Selecting a Mode” (page E-30).
• This enters the Altimeter Mode and displays an altitude reading after
about one second.
Note
• After you are fi nished, press
B
to return to the Timekeeping Mode and
stop altimeter readings.
•
The watch will return to the Timekeeping Mode automatically if you do
not perform any operation (page E-32).
• The measurement range for altitude is –700 to 10,000 meters (–2,300
to 32,800 feet).
• The displayed altitude value changes to
- - - -
if an altitude reading falls outside the measurement
range. An altitude value will reappear as soon as the altitude reading is within the allowable range.
• You can change the unit for displayed altitude values to either meters (m) or feet (ft). See “To specify
altitude, depth, barometric pressure, and temperature units” (page E-43).
Altitude Tendency Graph
Altitude
E-67
Note
• If you do not perform any button operation while in the Altimeter Mode, the watch will return to the
Ti
mekeeping Mode automatically after 12 hours (altitude reading interval: 2'00) or after one hour
(altitude reading interval: 0'05).
To specify the altitude reading interval
1. In the Altimeter Mode (page E-31), pull out the crown.
• This will cause the current altitude reading value to appear.
2. Press
B
.
• This will cause INT to appear on the digital display, along with the
fl ashing current reading interval setting.
3. Rotate the crown to select either fi ve seconds (
0'05
) or two minutes
(
2'00
) as the interval setting.
4. After the setting is the way you want, push the crown back in to exit the
setting screen.
Taking Altitude Readings
Use the procedure below to take basic altitude readings.
• See “Using Reference Altitude Values” (page E-69) for information about how to make altimeter readings
more accurate.
• See “How does the altimeter work?” (page E-75) for information about how the watch measures altitude.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
E-66
Using the Altimeter Mode
The watch takes altitude readings and displays results based on air pressure measurements taken by a
built-in pressure sensor.
• The displayed altitude reading is a relative altitude that is calculated based on measurement of
changes in barometric pressure by the watch’s pressure sensor. This means that barometric pressure
changes can cause readings taken at different times at the same location to be different. Also note that
the value displayed by the watch may be different from the actual elevation and/or sea level elevation
indicated for the area where you are located. When using the watch’s altimeter while mountain
climbing, it is recommended that you perform regular calibration in accordance with the local altitude
(elevation) indications.
Important!
• See “To specify a reference altitude value” (page E-70) and “Altimeter Precautions” (page E-76) for information
about how to minimize differences between readings produced by the watch and values provided by
local altitude (elevation) indications.
Getting Ready
Before actually taking an altitude reading you need to select an altitude reading interval.
Selecting the Altitude Reading Interval
You can select either of the two altitude measurement intervals below.
0'05
: Readings at one-second intervals for the fi rst three minutes, and then every fi ve seconds for
approximately the next hour
2'00
: Readings at one-second intervals for the fi rst three minutes, and then every two minutes for
approximately the next 12 hours
E-65
Location
• Taking a direction reading when you are near a source of strong magnetism can cause large errors in
readings. Because of this, you should avoid taking direction readings while in the vicinity of the
following types of objects: permanent magnets (magnetic necklaces, etc.), concentrations of metal
(metal doors, lockers, etc.), high tension wires, aerial wires, household appliances (TVs, personal
computers, washing machines, freezers, etc.)
• Accurate readings are also impossible indoors, especially inside ferroconcrete structures. This is
because the metal framework of such structures picks up magnetism from appliances, etc.
• Accurate direction readings are impossible while in a train, boat, air plane, etc.
Storage
• The precision of the bearing sensor may deteriorate if the watch becomes magnetized. Because of
this, you should store the watch away from magnets or any other sources of strong magnetism,
including: permanent magnets (magnetic necklaces, etc.), concentrations of metal (metal doors,
lockers, etc.), and household appliances (TVs, personal computers, washing machines, freezers, etc.)
• Whenever you suspect that the watch may have become magnetized, perform the procedure under “To
perform fi
gure 8 calibration” (page E-58) or “To perform 3-point calibration” (page E-60).
E-64
Recording the Bearing to an Objective
You can use the procedure in this section to record a bearing along with the date and time of the reading.
You can later recall the reading to view it.
Important!
• The watch has memory that is shared for storage of up to 40 records, including bearing data. Note that
recording new data when there are 40 data records in memory causes the oldest record to be deleted
automatically to make room for the new record. See “Viewing Recorded Data” (page E-87).
To record the bearing to an objective
While taking a direction reading, hold down
A
for at least two seconds.
• This records the bearing along with the current date and time.
• The watch will return to the Bearing Mode screen automatically after recording is complete.
Digital Compass Precautions
Magnetic North and True North
The northerly direction can be expressed either as magnetic north or true
north, which are different from each other. Also, it is important to keep in
mind that magnetic north moves over time.
• Magnetic north is the north that is indicated by the needle of a
compass.
• True north, which is the location of the North Pole of the Earth’s axis, is
the north that is normally indicated on maps.
• The difference between magnetic north and true north is called the
“declination”. The closer you get to the North Pole, the greater the
declination angle.
True north
Earth
Magnetic north
Operation Guide 5477
Loading ...
Loading ...
Loading ...