Loading ...
Loading ...
Loading ...
maintenance
WARNING: FOR YOUR OWN SAFETY, TURN SWITCH
"'OFF" AND REMOVE PLUG FROM POWER SOURCE
OUTLET BEFORE MAINTAINING OR LUBRICATING
YOUR DRILL PRESS,
Frequently blow out any dust that may accumulate inside
the motor.
A coat of automobile-type wax applied to the table and
column will help to keep the surfaces clean.
If the power cord is worn or cut, or damaged in any way,
have it replaced immediately.
For motor maintenance, follow instructions furnished with
motor.
r
lubrication
All of the BALL BEARINGS are packed with grease at the
factory. They require no further lubrication.
Periodically lubricate the SPLINES (grooves) in the spindle
and the RACK (teeth on the quill).
USE Sears Gear Case Lubricant.
1. Lower quill and spindle all the way down .. LOCK
the quill,
2. Use a small stick of wood and apply lubricant around
the inside of the hole in the spindle pulley.
3. Apply lubricant to RACK (teeth) on quill extending
below drill press head.
For motors lubrication, follow instructions furnished with
motor.
I I[
recommended accessories
Drills, Shaper Cutters, Router Bits ......... See Catalog
Rotary Planer ............................. 9-2745
Mortising Chisel Housing .................... 9-2465
Hollow Chisels and Mortising Bits .......... See Catalog
Dovetailing Attachment ..................... 9-2462
Shaper Fence Attachment ................... 9-2487
Hold-Down and Guide ...................... 9-2457
Drill Press Vises ....................... See Catalog
Rotary Table ............................. 9-2495
Tilt Table ................................ 9-2439
Co!let Chuck ............................. 9-24672
Shaper Cutter Adapter .................... 9-24832
Sanding Drum ..................... 9-2497 - 9-2498
Hole Saws up to 21/2in. alia............... See Catalog
Wire Wheels up to 4 in. dia. max ........... See Catalog
Buffing Wheels up to 4 in. dia. max ......... See Catalog
Polishing Wheel, 11/2" x 1 In .................. 9-64991
Column Collar ............................ 9-2438
Power Tool Know-how Handbooks
Radial Saw ............................ 9-2917
Table Saw ............................. 9-2918
The recommended accessories listed here are current and
were available at the time this manual was printed.
18
Loading ...
Loading ...
Loading ...