Loading ...
Loading ...
Loading ...
assembly
INSTALLING AND TENSIONING BELT
1. Place a straightedge such as a piece of wood, metal or
framing square across the pulleys.
2. Move the motor UPWARDS until the pulleys are IN
LINE ... tighten the motor mounting nuts with a ½ in.
wrench.
3.
4,
5.
6.
7_
8.
Place the belt on the pulleys.
Put a dab of grease such as Sears gear case lubricant on
the rubber tip of the BELT TENSIONING ROD,
Loosen HEX HEAD SCREW with a 7/16 in. wrench
... position BELT TENSIONING ROD as shown.
Push the motor to the right with moderate pressure
while pushing THE BELT TENSIONING rod against
the motor mount ... TIGHTEN the HEX SCREW.
If belt slips while drilling, readjust belt tension.
Replace the belt guard.
BELT TENSIONIN_
V
MOTOR
f
MOTOR
MOUNT
iNSTALLING LIGHT BULB
1. Install a light bulb (not larger than 60 watt) into the
socket inside the head.
\
12
Loading ...
Loading ...
Loading ...